Osmont EDNA1,2,3,4,5 pendant luminaire with glass shade and metal mounting.

The luminaires consist of a montura made of metal and a glass shade. Montura is made of steel sheet, powder-coated with IP43 protection, or polycarbonate moulding - IP43, cl. II. Three-layered shade, handmade TRIPLEX OPAL glass with frosted surfacecircular shape with slightly convex bottom. The shade is held in place by folding brackets. Edna luminaires can be installed as ceiling or wall mounted. The electrical equipment of the luminaires is very varied. From the classic incandescent luminaires with E27 socket, the diameters and numbers of lamps vary from 1xE27 60w to 3xE27 60w. Other electrical options are for compact lamps with electronic ballast. According to the diameter of the luminaire we define the wattage and number of lamps. This range starts with 13W with socket G24q-1 for the PL-C 13W 4p source type. up to two-unit variants up to 2x36W for Osram Dulux F36 with 2G10 socket. Another option for electrical equipment are circular fluorescent lamps with socket 2GX13. The luminaires with two circular fluorescent lamps, can be wired as double-circular on request. Each source can then be individually controlled by a switch and the luminaire has two luminance levels. The luminaires can be fitted with an emergency module in two versions as a steady-lighting emergency luminaire, or as an emergency-only luminaire for power failure. Another category is luminaires with LED sources, here there is a large range of wattages and colour renditions from warm white to cool white daylight colour.